Incremental Rotary Encoder 50mm Dia Shaft 8 E6c2-Cwz1X 1000pr

Specifications
E6C2-CWZ1X 360P Incremental Rotary Encoder 50mm Dia Shaft 8
E6C2-CWZ1X 360P Incremental Rotary Encoder 50mm Dia Shaft 8

Product Name: E6C2-C

Product introduction:
Firm& simple
Seal bearing, realize drip-proof and oil-proof performance of IP6f4
Enhance the performance of shaft load resistant, realize radial load of 50N and axial load of 30N.
The cable leading method is slanting, including transverse and back direction.
With protection circuit against reversing connection and load short circuit, improve reliability.
(also has linear driver output)

data sheet

Encoding method
Incremental
Power supply voltage
5 VDC -5% to 5 VDC +5% (ripple (p-p): 5% Max.)
Current consumption
160mA DC Max.
Inrush current
Current: approx. 9 A (Time: approx. 0.3 ms)
Resolution (Single turn type)
500 P/R
Output phases
A, -A, B, -B, Z and -Z
Control output (Output type)
Line driver output
Control output (Load current)
High level(Io): -20 mA
Low level(Is): 20 mA
Control output (Output voltage)
Vo: 2.5 V Min.
Vs: 0.5 V Max.
Starting positional point
Equipped
Max. response frequency
100 kHz
Phase difference on output
90 DEG -45 to +45 DEG
Rise and fall times of output
Rise time of output: 0.1 us Max.
Fall time of output: 0.1 us Max.
(Cable length: 2m, Io: -20mA Is: 20mA)
Starting torque
Room temperature: 10 mN.m Max.
Moment of inertia
3*10-7kg.m2 Max.
Shaft loading
Radial: 50 N
Thrust: 30 N
Max. permissible rotation
6000 r/min
Mechanical life expectancy
100 million rotations Min.
Ambient temperature
Operating: -10 to 70 CEL
Storage: -25 to 85 CEL
(with no icing or condensation)
Ambient humidity
Operating: 35 to 85 %RH
Storage: 35 to 85 %RH
(with no condensation)
Insulation resistance
20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength
500 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance
10 to 500 Hz, 2-mm or 150m/s2 double amplitude for 11 min 3 times each in X, Y, and Z directions
Shock resistance
1000m/s2 for 3 times each in X, Y, and Z directions
Degree of protection
IEC60529: IP64
Company standard: Oil resistance
Applicable standard (EC Directive (EMC Directive))
EMI: EN50081-2
Emission Enclosure: EN55011 Group 1 classA
Emission AC mains: EN55011 Group 1 classA
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Burst: IEC61000-4-4
CE marking: Equipped
Connection method
Pre-wired models (Cable length: 2 m)
Material (case)
Zinc alloy
Material (body)
Aluminum
Material (shaft)
SUS420J2
Tightening torque
0.5 N.m Max. (with M4 screw)
Weight (packed state)
approx. 400 g
Accessories
Instruction manual
Product Category: Outside diameter 50(slim type)
PCB Sensors
1.Encoding method Incremental
2.Power supply voltage 5 VDC -5% to 5 VDC +5% (ripple (p-p): 5% Max.)
E6C2-CWZ1X 500P/R 2M PCB Sensors
1. All of the encoderbrandnew,topqualitycomponents:absolutelyno used itemsor counterfeits.
2. The pictures are for reference only. Exact specifications should be obtained from the datasheet.
3. Prices, specifications, and availability of all items are subject to change without notice.
4. We are not responsible for typographical errors.
Payment Terms
- We accept payments made by Western Union,TT,PayPal, L/C
-Since you made the payment successfully, you can send us the Reference NO or MTCN.
Shipping
1.We will ship the items within 5 working days after the payment is reached.
2.We ship to you by Express or by sea according to the quantity and your will.
3.We are not responsible for any accidents, delays or other issues that are the responsibility of the shipping service.
4.Any import fees or charges are the buyer's responsibility.
Warranty
Warranty is available based on the following points:
1.The encoderguaranteed for one year.
2.If the item you purchase from our company are not of perfected quality, that is they don't work electronically t   o manufacturers specifications, simply return them to us for replacement or refund.
3.If the items is defective, please notify us within 3 days of delivery.
4.Any items must be returned in their original condition to qualify for a refund or replacement.
5.The buyer is responsible for all the return shipping cost incurred.